CIMTEK FILTERS
Please also see our product section of Filters and Strainers
Products are listed below underneath this brief introduction to the range.








|
THE CIMTEK RANGE OF FILTERS
There is no doubt, contamination in fuel storage tanks is rife. Causes can be condensation,
microbiological growth & sludge. Contaminated fuel in your vehicle will only lead to engine
down time and expensive repair bills. In todays modern business, you want your vehicles on
the road earning their money, not in a garage spending your money.
THE SOLUTION
- Prevention is better than the cure!
- Cimtek filters provide a simple and economical solution for the dispensing of Diesel fuel
- A unique filter which absorbs water and particles or just particles. Choose the version
you require.
- Unlike ordinary bowl filters/traps, these filters do not need regular manual draining
to remain effective
- Fits on the outlet side of fuel dispensers, choose gravity or pump versions and also
standard and high speed versions
HOW DO CIMTEK FILTERS WORK?
- They remove any particle contamination from the fuel and retain it within the
filter element
- They remove any water content from the fuel and it is retained within the filter
element.
- When the filter starts to become full the flow rate of the pump/nozzle will slow
down. This is a sign that the element is ready for changing.
- To replace the filter element, simply screw off the old one from the head and screw
on the new one. It is so simple!.
- All filter elements are disposable and not reuseable.
THE BENEFIT TO YOU
- When using a filter you will be sure of clean fuel, free of contamination
- It will help prevent premature engine wear
- Saves engine downtime and expensive repair bills
- Prolongs the life of the fuel filters inside your vehicles
- Your drivers will be out on the road, not sat in the canteen drinking tea all day
SAVE TIME AND MONEY!
We are so sure of this product, we use it ourselves!, see the picture of our wall mounted
pump and cimtek filter. As they say, 'Practice What You Preach!'.
Not sure which one to choose?, give us a call on 01924 275318 for advice based on the
equipment you would intend to use it with.
|


|
CIMTEK FUEL FILTER, PARTICLE 30 MICRON
- Only suitable for use with Diesel. Fits on outlet side only
- Aluminium filter head with disposable spin on/off filter elements
- 1 inch BSPF inline ports
- For gravity feed tanks, or pumps only up to 60L/min
- Particle only filtration down to 30 micron
- Max flow 60L/min. Max pressure 50 psi (3.4 bar)
- When the filter starts to become full the flow rate will slow down
- Kit consists of head and one element. Spare elements sold seperately
HEAD AND 1 ELEMENT: £37.00 + V.A.T (Total: £43.47)
Delivery: £FREE on this item
SPARE ELEMENT: £19.50 + V.A.T (Total: £22.91)
Delivery: £FREE on this item
|


|
CIMTEK FUEL FILTER, PARTICLE 10 MICRON
- Only suitable for use with Diesel. Fits on outlet side only
- Compact design can be used on service station pumps. Always seek approval before
using on a service station pump.
- Aluminium filter head with disposable spin on/off filter elements
- 1 inch BSPF inline ports
- For pumps only up to 50L/min
- Particle only filtration down to 10 micron
- Max flow 50L/min. Max pressure 50 psi (3.4 bar)
- When the filter starts to become full the flow rate will slow down
- Heads and Spare elements sold seperately
HEAD ONLY: £25.50 + V.A.T (Total: £29.96)
Delivery: £FREE on this item
SPARE ELEMENT: £25.50 + V.A.T (Total: £29.96)
Delivery: £FREE on this item
|


|
BIO DIESEL PARTICLE FILTER
- Specifically designed & tested for use with bio diesel
- Suitable for a mix of B20-B100 (B20 = 20% bio and 80% diesel mix)
- Fits on outlet side only
- Aluminium head with disposable spin-on filter elements
- 1"BSPF inline ports. Max pressure 50psi (3.4 bar)
- For use with pumps only up to 80L/Min
- Particle filtration to 1 micron
Filter Head: £29.00 + V.A.T (Total: £34.07)
Delivery: £FREE on this item
Particle Filter: £70.00 + V.A.T (Total: £82.25)
Delivery: £FREE on this item
|


|
BIO DIESEL WATER & PARTICLE FILTER
- Specifically designed & tested for use with bio diesel
- Suitable for a mix of B20-B100 (B20 = 20% bio and 80% diesel mix)
- Fits on outlet side only
- Aluminium head with disposable spin-on filter elements
- 1"BSPF inline ports. Max pressure 50psi (3.4 bar)
- For use with pumps only up to 70L/Min
- Water & Particle filtration to 1 micron
Filter Head: £29.00 + V.A.T (Total: £34.07)
Delivery: £FREE on this item
Particle Filter: £42.00 + V.A.T (Total: £49.35)
Delivery: £FREE on this item
|


|
CIMTEK FUEL FILTER, WATER AND PARTICLE, FOR GRAVITY
- Only suitable for diesel. Fits on outlet side only.
- Aluminium filter head with disposable spin on/off filter elements
- 1 inch BSPF inline ports
- For gravity feed tanks and pumps only up to 80L/min
- Traps both particle and water contamination
- Max flow 80L/min. Max pressure 50 psi (3.4 bar)
- When the filter starts to become full the flow rate will slow down
- Kit comes with head and one element. Spare elements sold seperately
GRAVITY WITH HEAD: £52.80 + V.A.T (Total: £62.04)
Delivery: £FREE on this item
GRAVITY SPARE ELEMENT: £33.00 + V.A.T (Total: £38.77)
Delivery: £FREE on this item
|


|
CIMTEK FUEL FILTER, WATER AND PARTICLE, FOR PUMPS
- Only suitable for diesel. Fits on outlet side only.
- Aluminium filter head with disposable spin on/off filter elements.
Standard element is 30 micron, 10 micron element also available
- 1 inch BSPF inline ports
- For pumps only up to 70L/min
- Traps both particle and water contamination
- Max flow 70L/min. Max pressure 50 psi (3.4 bar)
- When the filter starts to become full the flow rate will slow down
- Kit comes with head and one 30 micron element. Spare elements sold seperately
PUMP WITH HEAD: £43.00 + V.A.T (Total: £50.52)
Delivery: £FREE on this item
PUMP SPARE ELEMENT 30 MICRON: £33.00 + V.A.T (Total: £38.77)
Delivery: £FREE on this item
PUMP SPARE ELEMENT 10 MICRON: £37.00 + V.A.T (Total: £43.47)
Delivery: £FREE on this item
|


|
CIMTEK FUEL FILTER, WATER AND PARTICLE, HIGH CAPACITY
- Only suitable for diesel. Fits on outlet side only.
- Aluminium filter head with disposable spin on/off filter elements
- 1 inch BSPF inline ports. Standard element is 30 micron, 10 micron also available.
- For pumps only up to 120L/min
- Traps both particle and water contamination
- Max flow 120L/min. Max pressure 50 psi (3.4 bar)
- When the filter starts to become full the flow rate will slow down
- Heads and elements sold seperately
HEAD ONLY: £27.00 + V.A.T (Total: £31.72)
Delivery: £FREE on this item
SPARE ELEMENT 30 MICRON: £55.00 + V.A.T (Total: £64.62)
Delivery: £FREE on this item
SPARE ELEMENT 10 MICRON: £65.00 + V.A.T (Total: £76.37)
Delivery: £FREE on this item
|